Magician Outfit!

Magician Outfit!
Share
 

WHAT YOU NEED FOR MAGIC WAND:

• Clear inflexible plastic aquarium tubing (sold in pet stores)
• Craft knife
• Glitter and sequins and any other funky things to put inside the wand
• Modeling clay


WHAT TO DO:

• Use a craft knife to cut the tubing into 1-foot lengths (one for each wand).
• Seal one end of each tube with a bit of modeling clay.
• Fill tube with glitter and sequins before sealing the other end with clay


WHAT YOU NEED FOR TOP HAT:


• Black Poster Board (stiff cardboard)
• Black Felt Paper
• Pencil
• Glue Gun
• Stapler
• Scissors
• Craft knife


WHAT TO DO:

• Find a large plate to make a circular pattern on the Poster Board using a pencil then cut it out.
• Use a pencil to draw another circle inside the earlier circular pattern you made. Cut the inner circle with a cutter (like a donut).
• Using another Poster Board, form a cylinder. The mouth of the cylinder should be as big as the inner circle.
• Cut short vertical lines (around 1-2 inches long) around one end of the cylinder to form some flaps.
• Slip the "donut" through the cylinder.
• Staple or glue the flaps on the "donut".
• To close the top, use the open part of the hat as a pattern. Using a pencil trace it on remaining Poster Board leaving at least 2.5 – 5cm allowance. Cut it with scissors.
• Cut short vertical lines (2.5 - 5 cm long) around it to form flaps.
• Use this to cover the open top of the hat. Glue the flaps to the hat using a glue gun.
• You can make the hat look more elegant by covering the hat with felt paper. Use a glue gun for a clean finish. Covering it with felt paper hides the staple wires and flaps.

Love Sticky TV?

Like

36308 user(s)
love it enough to push the button